Electrician in Oak Ridge North, TX
Licensed, insured electricians for Oak Ridge North, a subdivision town on I-45 where about two thirds of the homes were built before 1980.
Electrical work for a 1960s subdivision that became a city.
Oak Ridge North is about 26 minutes from our Tomball shop, depending on traffic.
Oak Ridge North began in 1964. That year the Arkansas-based Spring Pines Corporation bought a large tract and started building a subdivision, just as I-45 through the tract was finished. The community incorporated in 1979. It sits about ten miles south of Conroe in southern Montgomery County, and the city now counts just over 3,000 residents. Census estimates show housing that is almost all single-family and owner-occupied, with a median build year of 1977.
Our Tomball shop at 13910 Alice Road is about 19 road miles from Oak Ridge North City Hall at 27424 Robinson Road, home of the city's permit office. Wired, a licensed and insured family business since 2005, handles the city permit and inspections on every job that needs them. For a free estimate at your Oak Ridge North address, call (713) 467-1125, answered 24/7.
What Oak Ridge North wiring and permits involve.
About two thirds of the houses predate 1980
Census estimates count about 528 Oak Ridge North homes built in the 1970s and another 200 from the 1960s, out of roughly 1,135. Only about ten houses have gone up since 2010. If your panel is original, we check what it carries before we recommend a service upgrade, a few new circuits or nothing at all.
Almost every electrical job needs a city permit
Oak Ridge North exempts only three kinds of residential electrical work from permits. The one that applies to homeowners covers replacing lamps and plugging portable equipment into permanently installed receptacles. The other two cover utilities and communication companies working on their own equipment. Other electrical work goes on the city's Trade Permit Application, sent to permits@oakridgenorth.com. The city wants inspection requests 24 hours ahead, by phone or by email to inspections@oakridgenorth.com, and we make that request for you.
Seven inspection types on the city's form
The electrical section of the city's Trade Permit Application lists T-Pole, Underground, Electric Rough, Wall Cover, Ceiling Cover, Temporary Cut In and Final inspections. It also asks for your service amperage and the number of circuits, so we confirm both at the house before we file.
Contractors register with the city every year
Oak Ridge North requires every contractor to register with the city before pulling a permit, and the registration has to be renewed each year. It takes copies of the related state licenses, the licensee's driver's license and a general liability insurance certificate naming the City of Oak Ridge North as certificate holder. Before you hire anyone for electrical work in town, ask whether their city registration is current.
Electrical services for Oak Ridge North homes.
ZIP codes we cover in Oak Ridge North: 77385, 77386.
- Panel and service upgrades for Oak Ridge North's 1960s and 1970s houses
- Level 2 EV chargers, sized to what an original or replaced panel can carry
- Outlets, switches and dedicated circuits for kitchens, garages and additions in Oak Ridge North's 1970s houses
- Whole-home surge protection, permitted through Oak Ridge North's Community Development Department
- Recessed lighting, ceiling fans, security lighting and AMP Lighting landscape fixtures, permitted through the city since new fixtures are not on its exempt list
- Smoke and CO detectors for gas-heated homes, which are most of the houses in town
- Electrical inspections for houses built in the 1960s and 1970s
- Troubleshooting and repairs for dead circuits and tripping breakers in Oak Ridge North's older wiring, with emergency calls taken 24/7
Questions we get from Oak Ridge North.
Do I need a permit to add an outlet or swap a ceiling fan in Oak Ridge North?
Yes, for both. Neither job is on the city's exempt list.
How fast does Oak Ridge North issue an electrical permit?
The city says permits that need no drawings are usually issued the same day. Work that needs drawings usually waits 10 days for plan review.
Can I pull the electrical permit myself?
Only for work you do yourself. Your request also needs proof of a homestead exemption.
Who do I call for an outage in 77385 versus 77386?
The city tells residents in 77386 to call Entergy for electric service and maintenance. In 77385, where residents may choose their provider, report it to the utility that serves your address. If your neighbors have power and you do not, or a circuit or the main breaker keeps tripping, call us at (713) 467-1125.
Is the panel in my 1970s Oak Ridge North house big enough for an EV charger?
It depends on whether your panel is original or has been replaced, and what it already carries. We check the amperage, open spaces and existing load before we quote. If the panel cannot carry a Level 2 charger, we plan a service upgrade first. The city's Trade Permit Application asks for your service amperage either way.
How long is the drive from your Tomball shop to Oak Ridge North?
About 26 minutes with no traffic. The route is roughly 19 road miles from Alice Road, by the Grand Parkway (a toll road) and then a short run north on I-45 to Robinson Road. Expect longer at rush hour.
Also in Oak Ridge North and around it.
Electrician in Oak Ridge North?
Call. The estimate is free.